The FT-100 series filling machine is designed to be used as a multi-drum multi-layer filler whether filling 20ltr containers, 200ltr drums or IBC's, but it will basically fill anything in-between 20lts through to 1000ltrs, request our internal opening nozzle if you are pail filling to minimise on splashing.
The main arm of the filling machine lifts and lowers to accommodate the multilayer filling, the filling arm itself can be manoeuvred around the pallet to accommodate all the containers on one level without having to adjust the arm height, this is achievable because of the dipping head on the end of the arm.
To speed up your filling process use the twin platform option, this will allow the operator to fill on platform 1 whilst platform 2 is being loaded with empty containers, once platform 1 has been completed simply move the filling arm over to platform 2 and continue to fill, at this point platform 1 can be unloaded and replaced with empty containers or drums.
This filling machine can be incorporated into either a new or existing conveyor system.
Our conveyors can be supplied in mild or stainless steel, gravity or powered conveyor, 240v, 415v, safe or hazardous area (zone 2) and these can also incorporate an inverter for speed control (safe area conveyors only) although the FT-100 can also be interfaced with a conveyor the conveyor system will reuire infill plates to enable the operator to walk around the filling area.
Easy strip down nozzle for cleaning.
Suitable for none foaming (Top Fill) & foaming (Bottom Fill).
Weights and Measures (DTI) approved.
Mobile platforms complete with wheels or fork lift points
Nozzles manufactured from 316 stainless steel, Hastelloy or PVDF with PTFE and Viton seals
Interfaced with weigh platform, flow meter or mass flow meter
Choice of weigh indicators / platforms or alternatively use your existing equipment.
Internal opening nozzle for open top containers / pails (optional)